Triaxial Wireless Accelerometer-WiSER 3X
What is a Wireless Accelerometer?
A Wireless Accelerometer is a device that converts motion or vibration into a voltage signal which is then transmitted to a receiver using a wireless protocol. Wireless accelerometers are used in industry to avoid the usage of cables which can be expensive or difficult to install.
Our Triaxial Wireless Accelerometer is a vibration sensor specially designed for vibration analysis with universal compatibility. WiSER 3x is a wifi accelerometer that sends 3 axis vibration data + 1 additional channel simultaneously to any data collector in the market. Also, WiSER 3x is a wireless ultra-low noise accelerometer with 12 kHz bandwidth that exceeds the characteristics above all of most conventional accelerometers.
This product is temporarily out of stock. You may opt-in our waiting list and we'll notify you once the product is restocked.
Product Overview
WiSER 3X is an Ultra-Portable Triaxial Wireless Vibration Sensor compatible with WiSER Vibe and Digivibe vibration analysis applications. It is the latest generation of wireless accelerometers, capable of sending 4 vibration channels in real time for X, Y and Z axes as well as an additional reference channel for phase comparison. In addition to being ultra-portable, WiSER 3X incorporates start and stop functionality in the same power button, to save valuable time during data collection.
Use WiSER 3x on your own system… The Wireless Accelerometer Universal Receiver is specially designed to connect to any vibration analysis equipment on the market to our Wireless Accelerometer. Therefore, This is the # 1 choice for wireless conversion of your system.
Real Time vibration streaming
Our 3 axis accelerometer sends data in real-time with a maximum delay of 0.2 seconds. Thus, allowing more than 1 million lines of resolution as well as recordings of several hours continuously if needed.
A Wireless Accelerometer compatible with your Cellphone!
Use your cellphone as a Vibration Analyzer: Our triaxial wireless sensor is able to connect to iOS and Windows devices. You can take recordings and perform simple FFT analysis on 4 simultaneous channels with our vibration analysis app WiSER Vibe Pro. Furthermore, connect your WiSER 3x directly via WiFi, it requires NO receiver!
Wireless Dynamic Balancing
Using our free app WiSER Vibe Pro or Digivibe for Windows, you can do dynamic balancing in situ and perform a multiplane balancing with WiSER™ 3x.
Just pair it and go, truly fast balancing!
Fast Data Collection Mode
WiSER 3x will measure Acceleration, Speed, Displacement and Envelope of acceleration in a single recording. No need for independent captures.
The power button is also used to start or stop a capture. Thus, you will not lose time having to release the accelerometer every time you record a new point. This is especially useful when collecting routes.
Anywhere, Anytime… Share Your Data
You have the freedom to manage your data. Feel free to share your measurements through the cloud EIAnalytic.com or by email, granting a deeper level of analysis experience with DigivibeMX.
Portable Wireless Accelerometer
Just place it and go! Take your wireless sensor, place it at the measuring point and then press button to start a measure. With this in mind you will get multiple measurements in just few seconds!
Multi-platform Wireless Accelerometer
Everything you need, anywhere you need it. Tablet, Laptop, or Mobile… You choose the part form. Use WiSER™ 3x with DigivibeMX software.
Product Features
Key Features:
-
Compatible with any data collector device
-
Full bandwidth 12kHz
-
Sensitivity of 100 mV/g
-
Long distance range up to 20m
-
Stainless steel housing
-
Operation temperature up to 185ºF (80ºC)
-
Stand-by Mode